Surface pumps of the BC and GNP series
Type:
Working position:
Pressure:
Volumetric feed:
Power:
BZ
horizontal
18-25 m
to 7,0 m3/h
0,7 – 1,2 kVt
BZ
vertical
18-25 m
to 7,0 м3/h
0,7 – 1,2 kVt
The surface pumps of the BC and GNP series are used
For supplying water from open tanks
Shallow wells
Ponds for watering personal plots.
BCs type pumps are referred to as “electric inlet pumps”, which require filling the pump part with water before start-up and installation check valve.
General operating conditions
limiting lower and upper values of the ambient temperature from 1oС tо 45oС (from 274oL to 318oК);
during operation air is not allowed to enter the pump part;
height above sea level no more than 1000 m;
Design
The pump is a monoblock – an electric motor with an attached one-stage pumping part.
The pumps are equipped with single-phase asynchronous electric motors with power from 690 to 1250 W, depending on the model, which allows you to create a pressure of 18 to 40 m.
According to the degree of protection against electric shock, the electric pump belongs to class I.
According to the degree of protection against moisture, the electric pump belongs to splash-proof devices (IPX4).
The BTs-1,2-18U1,1 and BTs-1,6-20-U1,1 pumps are available in two configurations: horizontal and vertical. BC pumps in
vertical design for easy carrying equipped with a folding handle.
Detailed characteristics of borehole centrifugal pumps of the NVP series series with a diameter of 4
